5 Issues You Need To Be Aware Concerning Tuckpointing

Brick, stone, or block may last up to 100 years. The mortar joints mainly last for around 20 to 30 years depending on their exposure to different weather conditions. One of the most common forms of repair at this time is mainly tuckpointing. If you happen to see cracks in your mortar or some evidence of damage caused by water, you may ask yourself, "Do I need to have my mortar joints repaired, and when is it a good time to start repairing them?" This a good question that can easily be answered. Below is a list of the most important things you need to know about tuckpointing.

1. Tuckpointing: What Is It After all?

In general terms, tuckpointing are the steps followed when carrying out maintenance and subsequent repairs of mortar joints in either brick walls or stone wall. This process is mainly done by either grinding or raking out the existing mortar up to a certain depth. After that, the open space is filled up with new and strong mortar. This is a labor-intensive process, and an excellent masonry firm does not need to be faced with difficulties in advising clients when such services need to be undertaken.

2. When is it necessary to Tuckpoint?

Whenever you suspect that the mortar in your wall is beginning to deteriorate and may have to be taken care of in terms of repair, there is a small and simple test that you can perform before taking the phone and calling the contractor. You can sharp object and rub or pass it through the mortar to see if it removes the powdered material used to hold your bricks in place. If it this is the case, then you do not need further clarification. You need to quickly find an expert in tuckpointing to help you fix your mortar. However, if the mortar is in shape, scratching it by sharp objects will not remove the powdered material. This is not a hard task as such. If the sharp object removes the powdered material, just call a mason for help.

3. What Are The Benefits of Doing Tuckpointing?

This is a very important process that you should not ignore at all, especially if you are a homeowner or a large business owner. It will come a time when the mortar becomes weak. This makes moisture to find its way to the brick masonry wall/stone. This could quickly lead to moisture challenges behind the wall. When ignored, chances of the wall crumbling down and injuring people while damaging other properties remain high. For this reason, it is important to tuckpoint the wall. However if the process is done in the right manner, chances of a wall surving for decades remain high.

4. Some Other Excellent Purpose to Do Tuckpointing

The process of tuckpointing is very important as it saves people a significant amount of time and money as opposed to doing so when it is too late and, the damage has been done. If you do not tuckpoint early enough, it will reach a point where you will have to replace the whole wall, an exercise which may end up being too expensive.

5. When Do You Know That You Have Delayed To is it Too Late to Tuckpoint?

When you realize that your walls get loose, then you know that it’s too late to tuckpoint. In this case, the only solution of mitigating the situation could be to pull the whole wall down and erect a whole new one. Without doubt, this is a process that is too costly to a lot of people. It is important to identify if your wall needs such services way early by calling a profession way early before the problem occurs. This will save you both time and money. Again, if you are not sure whether your walls need such services, just call an expert for help.